Is the pin EN=GND switching off both FETs: low side & high side?
Data sheet says: The enable pin turns on the DC-DC switching converter, without any definitions of "turns on" and/or "turns off" state.
Thank you,
Serge
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Is the pin EN=GND switching off both FETs: low side & high side?
Data sheet says: The enable pin turns on the DC-DC switching converter, without any definitions of "turns on" and/or "turns off" state.
Thank you,
Serge
Both FETs are off when the device is disabled.