• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

J7200XSOMXEVM: OSPI Burn

Jay Sun
Expert 1095 points
Part Number: J7200XSOMXEVM


Hello there

Now we can use OPSI to burn gateway Demo according to following:

PROCESSOR-SDK-J7200: OSPI flash : CAN-Ethernet gateway demo - Processors forum - Processors - TI E2E support forums

How to burn the "ex02_baremetal_multicore_echo_test" or other sample code in file "ti-processor-sdk-rtos-j7200-evm-07_03_00_07/pdk_j7200_07_03_00_2" with OSPI?

Please help!

Thanks a lot.

  • 0
    TI__Genius 15025 points

    Hi,

    The customer needs is how to "Merge the Baremetal multicore echo test" into 1 single image to flash onto the OSPI.

    For example : 

      The gateway-demo documents has 3 images for "ETH to ETH", how to make those 3 R5F images into 1 single image to flash?

    Any detail documents?

    BR Rio

  • 0 in reply to Rio Chan
    TI__Mastermind 37435 points

    Hi Jay, Rio

    Sorry for the delay.

    Rio Chan said:
    The customer needs is how to "Merge the Baremetal multicore echo test" into 1 single image to flash onto the OSPI.

    First of all, you cannot run a baremetal test anymore on SDK 7.2 onwards with the new SysFW architecture because MCU 1_0 must run a sciserver application. See this for more details.

    In case you want to flash an RTOS application you can take a look at this user guide

    Regards

    Vineet