• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 527 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

PROCESSOR-SDK-DRA8X-TDA4X: "license check failed" during building

TDA4VM: QNX BSP Build Issue

raj2022 muthu
Prodigy 80 points
Part Number: TDA4VM
Other Parts Discussed in Thread: DRA829

Dear TI Team,

I have downloaded  QNX SDP7.1 BSP for Texas instrument jacinto 7 J721E (DRA829/TDA4xM ) Evaluation Module image (Feb 02 2022) from QNX Software centre and QNX  Software Development platform 7.1

along with the following packages  form texas

ti-processor-sdk-qnx_j721e_07_03_00.tar.gz 

ti-processor-sdk-rtos-j721e-evm-07_03_00_07.tar.gz

and try to build the image.

But the build failed with the given below error message.

/home/pushparaj/qnx710/target/qnx7/usr/include/mk/qrules.mk:60: recipe for target 's28hx_erase.o' failed
make[9]: *** [s28hx_erase.o] Error 1
recurse.mk:96: recipe for target 'install' failed
make[8]: *** [install] Error 2
recurse.mk:96: recipe for target 'install' failed
make[7]: *** [install] Error 2
recurse.mk:96: recipe for target 'install' failed
make[6]: *** [install] Error 2
recurse.mk:96: recipe for target 'install' failed
make[5]: *** [install] Error 2
recurse.mk:96: recipe for target 'install' failed
make[4]: *** [install] Error 2
recurse.mk:96: recipe for target 'install' failed
make[3]: *** [install] Error 2
Makefile:38: recipe for target 'install' failed
make[2]: *** [install] Error 2
makefile:74: recipe for target 'bsp' failed
make[1]: *** [bsp] Error 2
makerules/makefile_qnx.mak:18: recipe for target 'qnx' failed
make: *** [qnx] Error 2

Please guide us to proceed further
  • 0
    TI__Guru** 110651 points

    Hi,

    There are no known build issues with the SDK 7.3 release, and error is not expected.   

    1) Unless you are tied to SDK 7.3 for a reason, recommendation would be to use the latest release available which at this time is SDK 8.1.

    2) Please provide the link to the build / installation step being followed that error is being seen at.

    3) Could you please provide the full build log, not enough to go on with provided error.

    Thanks,

    kb