• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 557 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMDS64GPEVM: Yocto Firmware for PRU Ethernet

TMDS64GPEVM: fit Image and U-Boot uEnv.txt script

Jakub Grad
Intellectual 720 points

Part Number: TMDS64GPEVM

Hello

I'm using TMDS64GPEVM board. Revision PRC101B. I'm using Yocto to build custom image. I'm building kernel in fitImage format and load it to the board over Ethernet. What I found that script uEnv.txt is not took in to account when booting from TFTP server. Only when I boot from SD Card my uEnv.txt script is read by U-Boot. Also in fitImage.its file there is no section for U-Boot script. So how to fix that?

Thanks.

BR

Jakub