AM3357: AM3357 Schematics

Jagbir

Expert 1525 points

Part Number: AM3357
Other Parts Discussed in Thread: SN74LVC2G07

Hi,

Can anyone review Sitara AM3357 schematics. The TI parts used in the design are:

Sitara AM3357, configured as an EtherCAT slave controller.
TPS65910A3A1RSL as a PMIC for AM3357
HX1188FNLT, DP83826ERHBR for EtherCAT interface
CDCE913PWR clock generation
TPS78633DCQR for LDO
THVD2450DRBR for RS485
SN74LVC541ADGVR,SN74LVC2G66YZPR,SN74LVC2G241DCUR,SN74LVC2G07

3240.Schematic.pdf

over 2 years ago

0 Kallikuppa Sreenivasa over 2 years ago

TI__Guru**** 198489 points

Hello Jagbir Singh

Thank you for the schematics review request.

The schematics review requested from customer is submitted for review through the TI sales or technical support team.

Please reach out to the TI sales or technical team you are working with to submit the schematics review request.

I quickly created a FAQ that could guide customers when designing custom boards.

(25) [FAQ] AM3351, AM3352, AM3354, AM3356, AM3357, AM3358, AM3359 Custom board design – Collaterals to Get started - Processors forum - Processors - TI E2E support forums

Regards,

Sreenivasa

0 Jagbir over 2 years ago in reply to Kallikuppa Sreenivasa

Expert 1525 points

I don't understand this red tape from TI. The TI sales/technical persons Alan Thompson and Rodney Farrow are in the loop on this.

0 Kallikuppa Sreenivasa over 2 years ago in reply to Jagbir

TI__Guru**** 198489 points

Hello Jagbir Singh

Thank you for the note.

I am not sure what you mean by in the loop.

Would you mind letting Alan Thompson and Rodney Farrow know that they would have to submit a request for you to take this forward.

Regards,

Sreenivasa

0 Kallikuppa Sreenivasa over 2 years ago in reply to Kallikuppa Sreenivasa

TI__Guru**** 198489 points

Hello Jagbir Singh

Adding additional inputs

The schematic checklist is available to do a self-review. I have that as part of the FAQ.

The standard review recommendation is to use the on-line checklist. Any specific questions regarding your design can be asked on E2E. It is recommended to include a specific functional block in a thread to minimize delay.

Regards,

Sreenivasa