TDA4VM: Does TDA4VM supports RGB-IR RAW input from the CSI MIPI sensor?

SimpleSoft

Part Number: TDA4VM

Hi,
I'm looking for a way to connect the MIPI CSI sensor 5Mpix with RGB-IR pattern. Does the VPAC of TDA4VM support RGB-IR pattern?

Thank you

over 2 years ago

0 Brijesh Jadav over 2 years ago

TI__Guru**** 452075 points

Hi,

Well, CSIRX can capture the valid MIPI images, but can you please help us first know what is the format for RGB-IR?

Regards,

Brijesh

0 SimpleSoft over 2 years ago in reply to Brijesh Jadav

Intellectual 840 points

Sensor is OX05B1S. Output : RAW10. But Bayer mask is RGB-IR

Info about RGB-IR format: www.e-consystems.com/.../

0 Brijesh Jadav over 2 years ago in reply to SimpleSoft

TI__Guru**** 452075 points

hi,

This is 4x4 format, it cannot be directly processed in the ISP. You would have to convert it into 2x2 format, by extracting RGB pixels and then can use ISP..

Regards,

Brijesh

0 SimpleSoft over 2 years ago in reply to Brijesh Jadav

Intellectual 840 points

Can I use the hardware of VPAC to extract RGB data from 4x4 RGB-IR?

+1 Brijesh Jadav over 2 years ago in reply to SimpleSoft

TI__Guru**** 452075 points

No, it cannot extract the channels. You would have to use DSP for it.

Processors

Processors forum

TDA4VM: Does TDA4VM supports RGB-IR RAW input from the CSI MIPI sensor?