SK-AM62: UART Relevent

veerapandiyan v

Intellectual 870 points

Part Number: SK-AM62
Other Parts Discussed in Thread: SYSCONFIG

Hi,

I am using SK-AM62x sitara board, i want use UART communication my project how to enable UART.

1.UART0 is working in debug console usb port only.

2. am62x datasheet functional block diagram also updated UART1 is Bluetooth.

3.am62x datasheet functional block diagram also updated UART2 is WIFI.

4.UART5 only working user expansion header.

5.I have enable UART3,4,6 is not working How to do i enable UART3,4,6 in ccs ide.

Best Regards,

VJPANDI

over 2 years ago

0 Vaibhav Kumar over 2 years ago

TI__Mastermind 46686 points

Hi Verrapandiyan,

In CCS IDE you can enable the different UARTs in this case the UART 3, 4 and 6 by selecting it via SysConfig tool.

Also refer the datasheet here in case you want to know the ball number for the UARTs configured through SysConfig: https://www.ti.com/lit/ds/symlink/am625.pdf?ts=1693383378895&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FAM625

Regards,

Vaibhav

0 veerapandiyan v over 2 years ago in reply to Vaibhav Kumar

Intellectual 870 points

Hi Vaibhav,

I am already refered datasheet and UART3,4 and 6 enable and check data is not coming.UART5 only working CP2102 module UART3,4 and 6 not working CP2102.

Best Regards,

VJPANDI

0 Vaibhav Kumar over 2 years ago in reply to veerapandiyan v

TI__Mastermind 46686 points

Hi Veerapandiyan,

Please follow all the updates here: e2e.ti.com/.../sk-am62-uart-not-working-in-mcu-pins

Regards,

Vaibhav

Processors

Processors forum

SK-AM62: UART Relevent