SK-TDA4VM: How to create a project on CCS?

DDM

Part Number: SK-TDA4VM

I have a SK-TDA4,a Code Composer Studio 11.0,a XDS110 debug probe,and download PDK RTOS sdk and found the demo source code in it.

Question:

How to create a new project through CCS and debug the program online through CCS？If you have this,Could you tell me a specific tutorial link,thank you.

over 1 year ago

0 Fabiana Jaimes over 1 year ago

TI__Genius 14050 points

Hi,

Please refer to this FAQ and let me know if you have any further questions: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1178240/faq-sk-tda4vm-how-do-i-connect-the-external-debugger-blackhawk-usb560v2-xds560v2-usb-system-trace-to-the-jtag-on-the-board?

Keep in mind that RTOS SDK is not supported on SK-TDA4VM. I recommend you use this SDK: https://www.ti.com/tool/download/PROCESSOR-SDK-LINUX-SK-TDA4VM

Thank you,

Fabiana Jaimes

0 DDM over 1 year ago in reply to Fabiana Jaimes

Prodigy 40 points

Yes,I have further questions.I've finished operations metioned in https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1178240/faq-sk-tda4vm-how-do-i-connect-the-external-debugger-blackhawk-usb560v2-xds560v2-usb-system-trace-to-the-jtag-on-the-board?.

Now,I can type charactors,compile project,build project and download excutable firmware into R5F-MCU_0 and Debug online thru XDS110,I can watch the parameters changing on CCS without FreeRTOS.

My question is:

How can I build the FreeRTOS in this project?

I have tried to build freertos in it,however it cause too many strange errors.I found there are no docs to guide me to finish build freertos in a project.

0 Praveen Rao over 1 year ago in reply to DDM

TI__Mastermind 34652 points

Hello, Thanks for the query. The expert looking into this issue is current out-of-office for a week. So there will be a delay in responding to your query. Request your patience till then.

Thanks.

0 Fabiana Jaimes over 1 year ago in reply to DDM

TI__Genius 14050 points

Hello,

I recommend referencing the RTOS SDK for instructions on building FreeRTOS. As mentioned before, these instructions have not been tested on the SK-TDA4VM device as it is not something we currently support so help with this would be limited.

Thank you,

Fabiana

Processors

Processors forum

SK-TDA4VM: How to create a project on CCS?