SK-AM62A-LP: Input/Output managment and configuration

Hello Martin,

Thanks for reaching out to Texas Instruments E2E Support Forum.

I am going through your query, so please expect responses in few business days.

Thanks,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x

Hello Martin,

I am glad you went through the Getting Started video for AM62A.

Apart from this, I would like to point you to few links here:

• Instructions to run the example can be found on AM62A Academy, here is a direct link to it: https://dev.ti.com/tirex/explore/node?node=A__AICr-D2Px50TfyquWY4iPw__AM62A-ACADEMY__WeZ9SsL__LATEST
  
  
• To setup the EVM, please refer to this detailed guide: https://software-dl.ti.com/mcu-plus-sdk/esd/AM62AX/09_00_00_19/exports/docs/api_guide_am62ax/EVM_SETUP_PAGE.html
  
  
• Install the MCU PLUS SDK Installer to get started with examples: https://www.ti.com/tool/download/MCU-PLUS-SDK-AM62A/09.00.00.19

Please feel free to ask me about anything else you need support with.

Regards,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x

Hello, Thank you for last information. I have some questions about installation.

In ""Flash SOC Initialization Binary", there's a part that says "Build all the binaries from the mcu_plus_sdk installation path", and says "for Windows: gmake -sj4 all", but I can't make it works, what do I have to do?

Hello Martin,

I have noted the problem you have faced here.

It would help me if you could send me the logs of the failure.

Looking forward to your response.

Regards,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x

Hi Vaibhav:

This is what I get, gmake is not recognized

Hello Martin,

Can you please install this: https://strawberryperl.com/

Post this gmake should be added to your path as well.

Please check and confirm.

Thanks,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x

Hello Vaibhav,

I already installed what you shared me, seems it installed correctly the "gmake", but now when I execute the next lines:

gmake -s all PROFILE=release

gmake -sj4 all

I get error on it, do you know what could it be the reason?

Hello Martin,

Thanks for your response.

Can you please confirm if you have downloaded all the prerequisites mentioned on this page: https://software-dl.ti.com/mcu-plus-sdk/esd/AM62AX/08_06_00_18/exports/docs/api_guide_am62ax/SDK_DOWNLOAD_PAGE.html

Regards,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x

I started to make all the installations again but, at time to reinstall CCS I got this error:

I changed to version ccs_setup_12.4.0.00007, I got same error, watching the log what I got this messages: 8484.install_logs.zip

Well... it's getting worst, I uninstalled everything related with TI on my PC to start it again and well, now I even can't try again to install CCS, , any idea how to solve it? thanks

Hello Martin,

I believe regarding this CCS Installation step, you have raised another E2E, so you can expect responses over there.

Martín Isaac Falcón Segovia said:

Also I want to know how to handle communication ports like CAN, Ethernet, LIN, SPI, etc from this device.  

I'd like to know where I can find examples of code and material saying how to handle this device too.

Since, your original question is inclined towards handling different protocols, we can stick to this once your setup is done properly.

Looking forward to it.

Thanks,

Vaibhav

ARM Based Processors | FAQ AM62x & AM62A | FAQ AM64x