AM62P: EVK M.2 Module

Tiago Borth

Part Number: AM62P
Other Parts Discussed in Thread: , CC3301

Dear all,

Is there any recomendation regarding specific Wi-Fi/BT module to be used on M.2 connection at the AM62P development board (SK-AM62P-LP)?

I've found some options, like Murata and ublox, but I' not sure if it's possible to implement it on the Linux image for this processor.

embeddedartists.com/wp-content/uploads/2020/06/1ZM_M2_Datasheet.pdf

https://www.u-blox.com/en/product/m2-jody-w2-card

https://www.u-blox.com/en/product/m2-jody-w3-card

It's important to say that I need at least Wi-Fi 5 in this case.

Regards
Tiago Fernandes Borth

over 2 years ago

0 Kallikuppa Sreenivasa over 2 years ago

TI__Guru**** 223305 points

Hello Tiago Borth,

Thank you for the query.

The below referenced links could help.

(31) AM625: WIFI module verified with SK-AM62B - Processors forum - Processors - TI E2E support forums

https://www.ti.com/tool/M2-CC3301

(31) SK-AM62B-P1: WiFi module through M.2 connector (mmc2: error -22 whilst initialising SDIO card) - Processors forum - Processors - TI E2E support forums

(31) SK-AM62B-P1: M.2 WIFI Module integration - Processors forum - Processors - TI E2E support forums

Regards,

Sreenivasa

0 Tiago Borth over 2 years ago

Prodigy 50 points

Hi, thank's for your quick reply.

Unfortunetly CC3301 supports only BLE and for my application A2DP is required (BT Classic).

Regards,
Tiago Fernandes Borth

0 Kallikuppa Sreenivasa over 2 years ago in reply to Tiago Borth

TI__Guru**** 223305 points

Hello Tiago Fernandes Borth

Thank you for tthe note.

I guess on the EVM we test the M.2 interface and i suspect i do not have a suggestion on the module to be used.

Have you had a chance to look at the TI portfolio to see if you could find the right device on TI.com

Regards,

Sreenivasa