SK-AM62: Is it possible to connect SK-AM62-SIP starter kit with MCCI Model 4922 Test Controller Kit?

Tommy Seol

Part Number: SK-AM62

Tool/software:

Hi Team,

EVSIS, my customer asked me if it is possible to connect SK-AM62-SIP starter kit with MCCI Model 4922 Test Controller Kit.

My customer asked this question with below links.

SK AM62 E2E - https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1357648/sk-am62-test-automation-header-interface---model-4922

MCCI - https://store.mcci.com/collections/test-controllers/products/model-4922-test-controller-kit

Could you please answer about that question?

Thanks.

Best regards,

Tommy Seol

3 months ago

0 Mukul Bhatnagar 3 months ago

TI__Guru* 81425 points

Tommy

Let me forward your question to MCCI team. I do not believe they have explicitly tested or evaluated the SK-AM62-SPI EVM at MCCI, but the EVM design is very similar to SK-AM62B/ SK-AM62B-P1 EVM , so this should be supportable by them.

0 Mukul Bhatnagar 3 months ago in reply to Mukul Bhatnagar

TI__Guru* 81425 points

Hi Tommy

I checked with MCCI team and following was their response

We have support for the board SK-AM62, and I checked the schematics of both SK-AM62 (SPRR448.ZIP) and SK-AM62-SIP (SPRR482.ZIP).

Both seems to be same w.r.t the test automation, so I hope our Model 4922 Test Controller Kit can support SK-AM62-SIP.

For testing the SK-AM62-SIP, we can use the commands for SK-AM62 in this case.

Processors

Processors forum

SK-AM62: Is it possible to connect SK-AM62-SIP starter kit with MCCI Model 4922 Test Controller Kit?