• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 102 subscribers
  • Views 141 views
  • Users 2 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AM62A7: The problem of adjusting the sequence of AE and GLBCE

AM62A7: GLBCE mode inquiry

peng qiang
Prodigy 250 points
Part Number: AM62A7

Tool/software:

Hi TI experts

By consulting the AM62A technical manual, we found that GLBCE has two modes.

The first mode we are currently using is   “GLBCE Continuous Frame Processing”.


May I ask which settings can be used to switch to the second mode?

  • 0
    TI__Guru 52315 points

    Hi Peng,

    The 2nd mode is not suitable for continuous video.
    Every sensor frame will have to be processed twice and that reduces the effective VISS fps to 50%.
    e.g., if VISS can process 300MP/s in mode-1, then it can only support ~150MP/s in mode-2.

  • 0 in reply to Gang Hua
    Prodigy 250 points

    Hi Gang 

    May I ask how to switch to the second mode? We would like to try to see if we can solve the issue of flickering.

  • 0 in reply to Gang Hua
    Prodigy 250 points

    Hi Gang 

    May I ask how to switch to the second mode? We would like to try to see if we can solve the issue of flickering.

  • 0 in reply to peng qiang
    TI__Guru 52315 points

    Hi peng,

    peng qiang said:
    May I ask how to switch to the second mode?

    There is no a special H/W mode for that.
    It is simply passing every image through VISS twice so that GLBCE context is update in the first pass.