AM6412: Schematics Review Support

Hello Nanjunda M

Thank you for the schematics review request.

We do not support schematics review request over E2E.

Are you working with Any of the TI sales team. If yes please work with the TI sales team to submit a request.

Regards,'

Sreenivasa

Hi Sreenivasa,

No, I do not have any TI sales team contact.

Can you please help with the review?

Thanks & Regards,

Nanjunda M

Hello Nanjunda M

Thank you.

You could share the schematics. I can provide some guidelines and point you to relevant documents and collaterals.

I expect this to take around 2 weeks.

Regards,

Sreenivasa

Hi Sreenivasa,

I have shared the file to you.

Please let us know the feedback.

Regards,

Nanjunda M

Hello Nanjunda M

Thank you.

I assume you reused the SK-AM64B schematics.

There are a number of updates that you may have to do.

The below FAQs have schematics embedded with design notes and review nptes.

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1337853/faq-am6442-am6441-am6422-am6421-am6412-am6411-custom-board-hardware-design---design-and-review-notes-for-reuse-of-tmds64evm-schematics
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1347060/faq-am6442-am6441-am6422-am6421-am6412-am6411-custom-board-hardware-design---design-and-review-notes-for-reuse-of-sk-am64b-schematics

Please read the relvant notes as required for the sections that you have implemented and make the changes.

Also many of the DNIs in the SK schematics have been populated in the custom design.

Additionally please refer to the design guide and checklist linked below and follow the checklist.

Recommended References for review and design of custom board
AM64x
www.ti.com/.../sprad67a.pdf
www.ti.com/.../spracu5c.pdf
www.ti.com/.../spracu1a.pdf
e2e.ti.com/.../faq-am6442-am6441-am6422-am6421-am6412-am6411-custom-board-hardware-design---faqs-related-to-processor-collaterals-functioning-peripherals-interface-and-evm-starter-kit
PRU-ICSSG
www.ti.com/.../sprac90g.pdf

e2e.ti.com/.../faq-am62x-am64x-custom-board-hardware-design-how-to-handle-used-unused-pins-peripherals-e-g-gpios-serdes-usb-csi-mmc-emmc-sd-card-csi-oldi-dsi

Regards,

Sreenivasa

Hello Nanjunda M

I did a quick check and observed errors that could cause functional or performance errors.

Please review the above FAQs where the notes are added and make required updates as i review the schematics.

Regards,

Sreenivasa

Hello Nanjunda M

Could you help me confirm if the board has been build with the schematics shared on the board is in design?

Regards,

Sreenivasa

Hello Nanjunda M

Ping in case you missed the above thread for me to plan a quick review.

Regards,

Regards,

Sreenivasa