Tool/software:
Hi,
In am5728 board when iam running weston it takes 96 percentage of CPU and board strucks and turned off after 10 mins.
Regards,
Ravindra.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
In am5728 board when iam running weston it takes 96 percentage of CPU and board strucks and turned off after 10 mins.
Regards,
Ravindra.
Hello Ravindra,
I am out of office today for US holiday.
Please expect a 1-2 day delay in response.
-Josue
Ravindra,
Based on https://e2e.ti.com/support/processors-group/processors/f/791/t/1410357, this issue could be because of a SGX driver bug that was introduced to the SDK on 9.1 release.
The plan is to have this updated on another release around November. No solid dates are yet available.
-Josue
Hi Josue,
This issue is comming in SDK-4 also.T
prebuilt imagesThe QT application is running properly with the prebuilt images. With the custom build (with no changes) only the issue was came into picture.
Regards,
Ravindra
Hello Ravindra,
We cannot support SDK 4. Please seek further support within the open source community.
-Josue
Hi Josue,
The above issue was resolved when i run the QT application as below in the am5728 board latest filesystem(SDK-9)
1. systemctl stop weston
2. ./qtapplication -platform linuxfb
Regards,
Ravindra
Ravindra,
Thank you for sharing your solution for the benefit of the community!
Best,
Josue