SK-AM62B: instruction flash tiboot3 via tftp

RJ DJ

Part Number: SK-AM62B

Tool/software:

hi ,

Able to load till uboot using DFU , so my aim is to load and copy tiboot3,tispl,uboot,fitimage using TTFTP server to EMMC . using this way is because of Errata i2329 .

How can load the binaries to ram or

How can copy the binaries directly to emmc ,

Please provide necessary step , boot commands ... etc

Hope my question is clear!

Regards,

-RJ

11 months ago

0 Daolin Qiu 11 months ago

TI__Genius 16085 points

Hello RJ,

Just to clarify,

1. You have already booted into U-boot via DFU

2. From U-boot you want to use Ethernet to send tiboot3.bin, tispl.bin, u-boot.img, fitimage using TFTP

3. Once the files have been sent to the board, you want to flash these files into eMMC

Does this describe the sequence you wanted to achieve?

If so, you might find the second section of https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1328520/faq-how-to-boot-sk-am62b-sk-am62a-via-ethernet-and-flash-u-boot-and-linux-binaries-into-emmc-via-ethernet to be a guide.

Please let us know if this helps

-Daolin

Processors

Processors forum

SK-AM62B: instruction flash tiboot3 via tftp