• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 236 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM62A3-Q1: Interfacing x2 RMII Ethernet With AM62A34ASMSIAMBRQ1

Tirthal Patel
Intellectual 360 points
Part Number: AM62A3-Q1
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

I want to utilize  x2 RMII Ethernet Port with AM62A34ASMSIAMBRQ1, I want to know by utilization of the x2 RMII ethernet Port it will not affect/Not able to use any other functionality provided by the Processor ?

For eg. If I use  x2 RMII Ethernet it will not affect the interfacing functionality of x3 CAN.

  • 0
    TI__Mastermind 40290 points

    Hi,

    A similar question was asked in this thread. 

    As mentioned in the above thread is to evaluate processor capabilities we recommend for you to look at the sysconfig tool provided by TI. This tool allows system developers to evaluate pin mux possibilities of the processor for their particular application. A quick check using the tool shows the above request would be possible in there are not pin mux errors detected. Please do not consider this answer as complete as the two interfaces is not a complete system. 

    Best Regards,

    Schuyler