TDA4VM: How does DCC capture raw images

Ying.li

Part Number: TDA4VM

Tool/software:

Now I have encountered the problem that DCC Error in capturing the RAW image. I have tried to turn it (ENABLE_DCC_TOOL "Enable DCC Tuning Tool Support" OFF->ON), but it still fails. The development board and the PC can ping through，Can you give me some advice？Thank you very much.

Looking forward to your reply.

over 1 year ago

0 Brijesh Jadav over 1 year ago

TI__Guru**** 501795 points

Hi,

What problem have you encountered in capturing images using DCC? Can you please share error information or log or something?

Regards,

Brijesh

0 Ying.li over 1 year ago in reply to Brijesh Jadav

Intellectual 350 points

This is my DCC log.

Request to get RAW image from Target : 192.168.10.99
Loaded communication DLL:itCommun.dll
Error in capturing the RAW image

Looking forward to your reply.

0 Ying.li over 1 year ago in reply to Ying.li

Intellectual 350 points

By the way, I used the SDK ti-processor-sdk-linux-edgeai-j721e-evm-09_02_00_05-Linux-x86，Where can I download DCC.exe. In addition, may I ask why this Error

Request to get RAW image from Target : 192.168.10.99
Loaded communication DLL:itCommun.dll
Error in capturing the RAW image

Looking forward to your reply.

0 Ying.li over 1 year ago in reply to Ying.li

Intellectual 350 points

I have solved this problem, but I do not know how to use the DCC software, can you provide me with some documents

0 Brijesh Jadav over 1 year ago in reply to Ying.li

TI__Guru**** 501795 points

DCC Documentation is part of the DCC itself. Can you please check in the tool?

Regards,

Brijesh

Processors

Processors forum

TDA4VM: How does DCC capture raw images