SK-TDA4VM: Binary needed for EEPROM and CPLD

Hi Jack,

Jack said:

Can you please provide us with pre-built binary for EEPROM and CPLD devices what used on SK-TDA4VM evk?

For EEPROM pre-programmed values, please take a look at the SK-TDA4VM user guide. I have provided a screenshot below of section 4.5 which has the main content you require.

You can access the CPLD information from the Design Files for the SK-TDA4VM. The design files have a lot of schematic and board content, however, you will specifically want to look for top_cpld.v file which has what is programmed on the CPLD.

Thanks,

Neehar

Hi Jack,

We do not provide a specific pre-built binary for the EEPROM. For our EVMs it is pre-programmed and if you want to program it, you can access and communicate via the WKUP_I2C0 bus. 

Jack said:

"If I don't use the EEPROM and instead insert a 'hacking code' or skip the process to clear error logs, could there be unexpected issues with initialization?"

Yes, it is possible to do this. I would recommend taking a look at the responses by Takuma in the following E2E:

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1365445/sk-tda4vm-eeprom-image-cpld-pin-assignment

Thanks,

Neehar