• State
  • Replies 7 replies
  • Subscribers 97 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Related

TDA4VM: Unable to Find Submitted TDA4VM Design Checklist / Schematic Review Request on E2E

Jack
Guru 10176 points

Part Number: TDA4VM

Hi E2E Support Team,

I submitted a request related to the TDA4VM Design Checklist on the E2E forum last week. However, I cannot find the submission in my "My Requests" list, and it does not appear to have been posted on the forum either.

The submission was categorized as a "Schematic Review Request." I am wondering if it may have been automatically filtered, flagged, or encountered an error during the posting process.

Could you please check whether the request was successfully received and advise if there were any issues that prevented it from being published?

I would appreciate your assistance in locating the request or helping me understand how to resubmit it if necessary.

Thank you for your support.

Best regards,
Jack Cha

  • 0
    TI__Guru 57615 points

    I am not aware of any schematic review request.  Can you provide link to posted E2E or re-submit request via this thread?

  • 0 in reply to Robert Eschler
    Guru 10176 points

    Hi Reobert, Thanks for your reply.

    At the time of registration, I submitted it twice using the same process. Although it appeared to be processed successfully, no record was retained in the system, which is why I had to create this new thread.

    I will try submitting it again as a related question under this thread. I would greatly appreciate your support.

    This issue has been pending for quite some time, and it is becoming increasingly difficult for the customer to continue their design activities while waiting for a resolution.

    Thank you in advance for your assistance.

    Regards, 
    Jack

  • 0 in reply to Jack
    Guru 10176 points

    Hi Robert,

    I just again raised a new ticket as I captured screenshot below. It is the same situation. It's not a recored from my dash board' request list.

    I have submitted the thread three times, but it appears to be automatically filtered each time and is not being published. Could you please help check if there is any issue with the submission?
    Regards, 
    Jack 

  • 0 in reply to Jack
    TI__Guru 57615 points

    I am sorry you are having issues using E2E.  I'm unclear on the problem - as you are able to submit this E2E ticket without issue.  I see you also submitted a TDA4VM Schematic review request +1year ago - but you never included the completed checklist and/or schematic. (Link)

    Are you looking for the checklist?  Its available here:  Link  (Note the Link is to PDF instruction, the actual checklist XLS is linked in the PDF)

  • 0 in reply to Robert Eschler
    Guru 10176 points

    Hi Rebert, 

    Can you please check their checklist reviewed initially?

    Thanks

    Regards, 

    Jack 

    3364.TDA4VM_TI_Review_v1.1.pdf

    AM6x_TDA4x_DRA8x_SchemCheckList_Tool_v2.02.0_checked.xlsm.zip

  • 0 in reply to Jack
    TI__Guru 57615 points

    Yes - I'll submit for review. It typically takes ~1 week. Can you provide info who customer is for this design?  I will log into our review tracking system.

  • 0 in reply to Robert Eschler
    Guru 10176 points

    Hi Rebert, 

    Thanks for your support. The customer name is QKSoft who develops AI Powered Cage Monitoring System. Their target MP date is Q2'27. Annual demnad is less than 10k. Thanks.

    * Customer Name: QKSoft

    * Application: AI Powered Cage Monitoring System

    * Target MP date: Q2'27

    * Annual demand: less than 10K

    Best Regards, 
    Jack