PDF Document for OMAPL138 RPRC User Boot Loader

Duy-Ky Nguyen88210

Hello,

I had a TI PDF document from TI about all details about RPRC to create an flash image from plain binary by adding some special code to mark the entry point, ...

Could you tell me where to get this PDF ?

Thanks,

~Duy-Ky

over 11 years ago

0 Titusrathinaraj Stalin over 11 years ago

TI__Guru** 116100 points

Hi Duy-Ky,

Sorry, I don't know that what document are you talking about.

Please refer the following TI wiki and pdf.

http://www.ti.com/lit/an/sprab41e/sprab41e.pdf

http://processors.wiki.ti.com/index.php/OMAPL138_StarterWare_Booting_And_Flashing#Using_out2rprc_to_Create_the_Application_Binary

Also please refer to the tools/out2rprc/README.txt file in your StarterWare installation.

Could you please elaborate your problem/requirement.

0 Duy-Ky Nguyen88210 over 11 years ago in reply to Titusrathinaraj Stalin

Expert 2250 points

Hello Titusrathinaraj,

The PDF you attached is exactly what I'm after.

Thanks so much,

~Duy-Ky

0 Titusrathinaraj Stalin over 11 years ago in reply to Duy-Ky Nguyen88210

TI__Guru** 116100 points

Hi Duy-Ky,

Sounds goods.

Thanks for your update.

Please close the thread by pressing the green verify button.

Processors

Processors forum

PDF Document for OMAPL138 RPRC User Boot Loader