Routing MCBSP to DaughterCard expansion

Sundas Nayab1

I want to route MCBSP to daughtercard connectors rather than the codec. Can anyone please guide me on configuring the CPLD MISC register, I know for this I have to set MCBSP1SEL or MCBSP2SEL bits in misc register but I dont know how?

over 10 years ago

0 Sivaraj Kuppuraj over 10 years ago

TI__Mastermind 35645 points

Hi,

Thanks for your post.

I am not sure about the device which you are working.

May be, I hope there are E2E posts referred below which would help you to configure CPLD MISC register. Please check it.

http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115/p/104382/367380#367380

http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115/p/49969/177203#177203

Thanks & regards,

Sivaraj K

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question

-------------------------------------------------------------------------------------------------------

Processors

Processors forum

Routing MCBSP to DaughterCard expansion