This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM8148 DDR slave ratio search program on the target hardware platform

Hi. 

We are trying to run DDR software leveling as described here: 

http://processors.wiki.ti.com/index.php/TI814x-DDR3-Init-U-Boot

It says:

Make sure the Boot Mode / Configuration Select Switch are set to all 0s.

Does it means all BTMODE[0:16] should be set to 0, or just BTMODE[0:5] ??