TMS320C6713: syntax for i/p and o/p in code composer.

AMAN SINGH85

Part Number: TMS320C6713

i am working on TMS320C6713 kit , i have bought expansion connector 80 pin ,i want to connect digital input to one of i/o port and take output from other digital port . i want u to help me to which pin number i have to connect input and output , and syntax for input and output in code composer studio .

over 9 years ago

0 Rahul Prabhu over 9 years ago

TI__Guru** 116950 points

The descriptions of pin on the expansion connector are described in the DSK Kit technical reference manual from the board manufacturer :
c6000.spectrumdigital.com/.../6713_dsk_techref.pdf

Please refer to section 3.3 for pin description. Please specify what pin you wish to use for use to provide software guidance.

Regards,
Rahul

0 AMAN SINGH85 over 9 years ago in reply to Rahul Prabhu

Prodigy 40 points

Emif data pin 31
Emif data pin 29

0 RandyP over 9 years ago in reply to AMAN SINGH85

TI__Guru* 84110 points

Aman,

Why did you select those pins? The EMIF data bus is used for accessing parallel data devices like SRAM or Flash or similar. They are not useful for independent single bit communication, which is the implication between this thread and your other one here.

Please explain why these pins were chosen for your question. That will help us be able to help you.

Regards,
RandyP

Processors

Processors forum

TMS320C6713: syntax for i/p and o/p in code composer.