programmer for tms320c6713

RAMYA M S

Other Parts Discussed in Thread: TMS320C6748

i am new to dsp processor. Now i have decided to choose tms320c6713 to use for my project. I am going to design hardware project..i want to embed dsp processor in to my measuring device i am going to design. Is any separate programmer available to dump the CCS programs in to the chip. just like pic programmer after programming. Please help. waiting for reply

over 8 years ago

0 Senthilkumar Srinivasan over 8 years ago

TI__Mastermind 43660 points

Ramya,

The below e2e threads would be more helpful to understand C6713 programming.

e2e.ti.com/.../412188

e2e.ti.com/.../214799

By the way, we would also suggest you to consider TMS320C6748 for your project. It is the latest low poser DSP and you would get wide support for this device. There is a low cost development kit also available for this device.

www.ti.com/.../TMS320C6748

www.ti.com/.../tmdxlcdk6748

processors.wiki.ti.com/.../C6748_Development_Kit_(LCDK)

Regards,
Senthil

0 RAMYA M S over 8 years ago in reply to Senthilkumar Srinivasan

Prodigy 90 points

thank you sir. Please suggest which is the best JTAG debugger for C67x... because we want to use the programs in a metering device which we are going to design

0 Senthilkumar Srinivasan over 8 years ago in reply to RAMYA M S

TI__Mastermind 43660 points

Ramya,

For C6713 device, the recommended emulator is XDS560V2.

www.ti.com/.../toolssoftware

For C6748, Please refer below link.

www.ti.com/.../toolssoftware

Regards,
Senthil

0 RAMYA M S over 8 years ago in reply to Senthilkumar Srinivasan

Prodigy 90 points

thanku sir. Is tms320c6748 supports for calculating the harmonics of order upto 49th order????? bcoz i heard that c6713 can support only upto 18..is it true..which will be helpful

Processors

Processors forum

programmer for tms320c6713