Linux/TMS320DM8148: My Kernel Boot is Stucking at making a syslink notify driver.

Ammar

Part Number: TMS320DM8148

Tool/software: Linux

I am using custom dm814x , with DDR3 512MB using only one DDR0 Controller . While booting , when booting it stucks before notify_init.

When i disabled the syslink config from my kernel , the boot get well without loading any firmware.

So what should be changed in order to get syslink enabled ?

Ammar Zafr

over 8 years ago

0 Pavel Botev over 8 years ago

TI__Guru**** 170625 points

Hi Ammar,

Do you use DM814x EZSDK 5.05.02.00? Please provide full console log for analysis.

Regards,
Pavel

0 Ammar over 8 years ago in reply to Pavel Botev

Expert 2230 points

Hi Pavel,

Was able to solve this issue , by setting the address for notify_init in bootargs.
Can you help me with files that i need to adjust for memory map and drivers that are needed to be rebuild for Only 512 MB Ram which is on DDR0.

BR
Ammar Zafar

0 Pavel Botev over 8 years ago in reply to Ammar

TI__Guru**** 170625 points

Ammar,

Please close this thread and open new one for your new question.

Regards,
Pavel

0 Ammar over 8 years ago in reply to Pavel Botev

Expert 2230 points

I have started the new thread.
e2e.ti.com/.../613563

Processors

Processors forum

Linux/TMS320DM8148: My Kernel Boot is Stucking at making a syslink notify driver.