TDA2PXEVM: How can I get DCC(Dynamic Camera Configuration ) Tool and generate DCC configuration from ISP register dump?

user4836286

Part Number: TDA2PXEVM

Hello,

Where can I get DCC tool installer?

And how to generate DCC configuration from ISP register dump? My ISP tuning partner is tuning sensor by changing ISP register value directly. He can provide dump of tuned register but he doesn't know how to convert it to DCC configuration can be used VSDK.

Best regards,

Wilson.

over 7 years ago

0 Yordan Kamenov over 7 years ago

TI__Mastermind 42515 points

Hi Wilson,

DCC tool can be downloaded from CDDS (you need to contact your local FAE if you do not have access).
Please check chapter "3.9 DCC" in VisionSDK_UserGuide_TDA3xx.pdf for the CDDS link and instructions for DCC tools usage.

Regards,
Yordan

0 user4836286 over 7 years ago in reply to Yordan Kamenov

Expert 1300 points

Yordan,
Thanks for guiding. I'll contact local FAE to get access right. BTW, how can I convert register dump to DCC?
Best regards,
Wilson

0 Brijesh Jadav over 7 years ago in reply to user4836286

TI__Guru**** 449655 points

Wilson,

There are different tools in DCC to convert registers stored in xml to binary format. Is that what you are looking for?

Rgds,
Brijesh

Processors

Processors forum

TDA2PXEVM: How can I get DCC(Dynamic Camera Configuration ) Tool and generate DCC configuration from ISP register dump?