CCS/TMS320C6748: PRSC module failed to write a register

raj eg

Prodigy 230 points

Part Number: TMS320C6748

Tool/software: Code Composer Studio

Good day,

we are using customize DSP board.

but we r facing error " "Error-6311) PRSC module failed to wire to a register.

(Emulation package 5.1.450.0)."

Please do the needful how to resolve this error.

Please find the attached our Schematic diagram.

We are waiting for your valuable reply.

Thanks

Rajendhranti_schematic.pdf

over 7 years ago

0 Cvetolin Shulev-XID over 7 years ago

TI__Guru 65405 points

Hi Rajendhran,

The attached schematic pdf seems broken. Could you check and reattach it.

BR
Tsvetolin Shulev

0 Mark M over 7 years ago

TI__Mastermind 30140 points

Hi Rajendhran,

Please refer to this similar post and guidance.

e2e.ti.com/.../692580

Hope this helps,
Mark

0 raj eg over 7 years ago in reply to Mark M

Prodigy 230 points

HI, Good day,

We design a customized board same as TMS320c6748.

We are using code compressor studio 8.0.0, connection is Texas Instruments XDS100v3 USB Debug Probe and device is TMS320c6748BZWT.

we checked the power sequence 3.3v, 1.8v and 1.3v are fine.

Initially we check the Test connection we getting the message '( The JTAG DR Integrity scan-test has succeeded)' . i hope DSP Processor ( TMS320c6748BZWT ) has detected.

And then we are flashing the code we getting error message" "Error-6311) PRSC module failed to wire to a register. (Emulation package 5.1.450.0)."

if any special procedure to flashing the code in first time of DSP Processor (TMS320c6748BZWT).

kindly give me the solution how to resolve this issue.

please do the needful.

we are waiting for your valuable reply.

Thanks and Regards

0 Mark M over 7 years ago in reply to raj eg

TI__Mastermind 30140 points

Hi,

I found that this post is duplicated at this link: https://e2e.ti.com/support/processors/f/791/t/726904

Closing this thread.

Regards,
Mark

Processors

Processors forum

CCS/TMS320C6748: PRSC module failed to write a register