DRA744: wifi module on SDIO no activity @ 1.8V IO interface

Colombo Carlo

Part Number: DRA744

HI everybody ,

related to previous post , further investigation and it looks like new SDIO std you do not need to start 3.3V and then go 1.8V .

new std accept 1.8V all the time .

now if I set 1.8V on SDIo interface I see no activity at all ... why ?

same sw setting @ 3.3 everthing works

coudl you help ?

best regrads

Carlo

over 6 years ago

0 Brad Griffis over 6 years ago

TI__Guru*** 125430 points

Please provide the 32-bit hex value of the register CTRL_CORE_CONTROL_PBIAS at address 0x4A00 2E00.

0 Yordan Kamenov over 5 years ago in reply to Brad Griffis

TI__Mastermind 42515 points

Hi Carlo,

We haven't heard back from you, I'm assuming you were able to resolve your issue.
If not, just post a reply below (or create a new thread if the thread has locked due to time-out).

Regards,
Yordan

Processors

Processors forum

DRA744: wifi module on SDIO no activity @ 1.8V IO interface