CCS/66AK2G12: how to create flash image and how to flash it in the EVM and Diag project to test the EVM

selvamuthukumaran g

Intellectual 445 points

Part Number: 66AK2G12

Tool/software: Code Composer Studio

Hi,

EVM: K2GEVM.

Tool: CCS v9.2.

SDK: - ti-processor-sdk-rtos-k2g-evm-06.00.00.07-Windows-x86-Install

I need to create and flash a bootable iamge in my EVM board I searched for so many links but I couldn't find the right one all links are having K2H/L EVM's.

can I anyone please tell me how to create a bootable iamge for flashing.

diagnostic project I can't able to run the make file in the path you have mentioned to create the Diag project out files.

let me know how to create the Diag project for my EVMK2G.

over 5 years ago

0 Yordan Kovachev over 5 years ago

TI__Guru**** 161600 points

Hi,

can I anyone please tell me how to create a bootable iamge for flashing

If you mean building the MLO, you should follow this guide:

The steps to build the MLO as a component of the PDK are:
cd ti/pdk_k2g_1_0_14/packages/

source pdksetupenv.sh

make sbl

As for building the diagnostics to run from SD Card, you should refer to this guide:

Best Regards,
Yordan

0 selvamuthukumaran g over 5 years ago in reply to Yordan Kovachev

Intellectual 445 points

i have executed the command as per your suggestion i am getting make 0r gmake not recognized.

steps i have followed :-

in the diag path typed > make evmK2G_sd (or) gmake evmK2G_sd

this is not working for me please help me out to resolve it

0 Yordan Kovachev over 5 years ago in reply to selvamuthukumaran g

TI__Guru**** 161600 points

Hi,
I executed the following commands:
cd ~/ti/pdk_k2g_1_0_14/packages

source pdksetupenv.sh

cd board/diag/

make evmK2G_sd

And was able to successfully build the diagnostics examples.

Best Regards,
Yordan

0 selvamuthukumaran g over 5 years ago in reply to Yordan Kovachev

Intellectual 445 points

can anyone please tell me the solution for this issue?

0 Yordan Kovachev over 5 years ago in reply to selvamuthukumaran g

TI__Guru**** 161600 points

Hi,

You either did not set your environment correctly and are skipping some of the steps for making the examples or your installation may be corrupted, consider reinstalling the sdk and rebuilding the sd examples following exactly the steps from the user guide.

Best Regards,
Yordan

Processors

Processors forum

CCS/66AK2G12: how to create flash image and how to flash it in the EVM and Diag project to test the EVM