AM6548: Inquiry about Maximum power-consumption and power-consumption in Low-Power-Mode

Miyazaki-san,

We strongly recommend following the power solution used on the IDK.  That design accommodates the max power of the AM6548 device.

You can find other power information here:

Regards,

Kyle

Hi Kyle-san,

I tried to search for the max power of the AM6548 in Datasheet/Processor-SDK guide again, however, I was not able to find it yet…

According to the following E2E thread, we can see Target value . are those following values still available at this time?

=============

It seems that their power consumption is targeted to the following.
・active max:　9.5W or less
・suspend:　16.5 mW or less

https://e2e.ti.com/support/processors/f/791/t/749096

=============

 Also, According to the following E2E thread, TI plans to develop silicon rev 2.0. I suppose that TI is making an efforts to do full characterization of silicon rev 2.0 chip now. Is that correct?

I believe that AM6548 production schedule would be a little bit delay. Are you able to share the current production(RTM) schedule, please?

https://e2e.ti.com/support/processors/f/791/p/876840/3245210

Best regards, Miyazaki

Hi Kyle,

Thanks for your comments. I shared your comments with customer.

Best regards, Miyazaki