This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Original question:
Part Number: TMDSCSK8127
Hi,
I have some problems when I modified Rules.make, related pictures follow.
Hi,
I could not see picture, did you post it?
I would suggest to go through the userguide and made changes accordingly.
Regards,
Brijesh
HI,
i captured my problems about Rules.make on the rules.make.docx, please check.thanks!
Regards,
Dan
Hi,
can you check MakeFile?
regards,
Dan
# ============================================================================
# Copyright (c) Texas Instruments Inc 2013
#
# Use of this software is controlled by the terms and conditions found in the
# license agreement under which this software has been supplied or provided.
# ============================================================================
DIR=default
FILE=default
include Rules.make
include $(ROOTDIR)/makerules/build_config.mk
include $(ROOTDIR)/makerules/env.mk
include $(ROOTDIR)/makerules/platform.mk
include $(ROOTDIR)/component.mk
ipncapp:
app hdvpss iss mcfw fsupdate
clean:
appclean hdvpssclean issclean mcfwclean
all:
clean ipncapp
##### Code Checkers #####
sc_indent:
ifeq ($(DIR), default)
ifeq ($(FILE), default)
$(SC_SCRIPTS_BASE_DIR)/SCIndent_RDK.pl $(MCFW_ROOT_PATH)
else
$(SC_SCRIPTS_BASE_DIR)/SCIndent_RDK.pl -file $(FILE)
endif
else
$(SC_SCRIPTS_BASE_DIR)/SCIndent_RDK.pl -dir $(DIR)
endif
sc_check:
ifeq ($(DIR), default)
ifeq ($(FILE), default)
$(SC_SCRIPTS_BASE_DIR)/SCCheckers_RDK.pl $(MCFW_ROOT_PATH)
else
$(SC_SCRIPTS_BASE_DIR)/SCCheckers_RDK.pl -file $(FILE)
endif
else
$(SC_SCRIPTS_BASE_DIR)/SCCheckers_RDK.pl -dir $(DIR)
endif
sc_insert:
ifeq ($(DIR), default)
ifeq ($(FILE), default)
$(SC_SCRIPTS_BASE_DIR)/SCInsert_RDK.pl $(MCFW_ROOT_PATH)
else
$(SC_SCRIPTS_BASE_DIR)/SCInsert_RDK.pl -file $(FILE)
endif
else
$(SC_SCRIPTS_BASE_DIR)/SCInsert_RDK.pl -dir $(DIR)
endif
sc_code2comment:
$(SC_SCRIPTS_BASE_DIR)/SCCode2Comment_RDK.pl -dir $(MCFW_ROOT_PATH)
$(SC_SCRIPTS_BASE_DIR)/cloc-1.55.pl $(MCFW_ROOT_PATH)
sc_cpp:
$(SC_SCRIPTS_BASE_DIR)/SCInsertCPP_Only_RDK.pl -dir $(DIR)
#### McFW BUILD #####
mcfw_linux:
make -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/mcfw/src_linux
make -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/demos
mcfw_linux_clean:
make -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/mcfw/src_linux clean
make -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/demos clean
mcfw_linux_all:
mcfw_linux_clean mcfw_linux
mcfw_bios6:
$(MAKE) -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/mcfw/src_bios6 $(TARGET)
mcfw_bios6_clean:
$(MAKE) -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/mcfw/src_bios6 clean
mcfw_bios6_all:
mcfw_bios6_clean mcfw_bios6
mcfw:
mcfw_linux mcfw_bios6
mcfwclean:
mcfw_linux_clean mcfw_bios6_clean
mcfwall:
mcfwclean mcfw
##### IPNCAPP BUILD #####
applibs:
ifneq ($(MAKE_TARGET), depend)
$(MAKE) -C$(IPNC_DIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) $(MAKE_TARGET)
endif
appclean:
$(MAKE) applibs MAKE_TARGET=clean
appdepend:
$(MAKE) applibs MAKE_TARGET=depend
appinstall:
$(MAKE) applibs MAKE_TARGET=install
app:
appdepend applibs appinstall
appall:
appclean app
##### XDC BUILD #####
XDC_BUILD_PKG_LIST=$(fc_PATH)/packages/ti.sdo.fc.ires.hdvicp
xdcpkgs:
$(xdc_PATH)/xdc XDCBUILDCFG=$(CONFIG_BLD_XDC_$(ISA)) -PD $(subst .,/,$(XDC_BUILD_PKG_LIST))
xdcpkgs_clean:
$(xdc_PATH)/xdc XDCBUILDCFG=$(CONFIG_BLD_XDC_$(ISA)) clean -PD $(subst .,/,$(XDC_BUILD_PKG_LIST))
##### ISS BUILD #####
iss:
$(MAKE) -C $(iss_PATH)/packages/ti/psp/iss $(TARGET) CORE=m3vpss
issclean:
$(MAKE) iss TARGET=clean
issall:
issclean iss
##### HDVPSS BUILD #####
hdvpss:
$(MAKE) -C $(hdvpss_PATH)/packages/ti/psp/vps $(TARGET) CORE=m3vpss
$(MAKE) -C $(hdvpss_PATH)/packages/ti/psp/i2c $(TARGET) CORE=m3vpss
$(MAKE) -C $(hdvpss_PATH)/packages/ti/psp/devices $(TARGET) CORE=m3vpss
$(MAKE) -C $(hdvpss_PATH)/packages/ti/psp/platforms $(TARGET) CORE=m3vpss
$(MAKE) -C $(hdvpss_PATH)/packages/ti/psp/proxyServer $(TARGET) CORE=m3vpss
hdvpssclean:
$(MAKE) hdvpss TARGET=clean
hdvpssall:
hdvpssclean hdvpss
itt:
#$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/dcc $(TARGET)
#cp $(DEST_ROOT)/lib/$(ISA)/$(PROFILE_m3video)/dcc.aem3 $(iss_PATH)/packages/ti/psp/iss/alg/dcc/lib/release/iss_dcc.aem3
#$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/vsp_awb $(TARGET)
#cp $(DEST_ROOT)/lib/$(ISA)/$(PROFILE_m3video)/vsp_awb.aem3 $(MCFW_ROOT_PATH)/itt/itt_bios6/vsp_awb/lib/vsp_awb.aem3
$(MAKE) -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/itt/itt_bios6/itt_app $(TARGET)
make -fMAKEFILE.MK -C$(MCFW_ROOT_PATH)/itt/itt_linux
cp $(MCFW_ROOT_PATH)/itt/itt_linux/autorun.sh $(EXEC_DIR)/.
make fsupdate
itt_clean:
#$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/dcc clean
#$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/vsp_awb clean
$(MAKE) -fMAKEFILE.MK -C $(MCFW_ROOT_PATH)/itt/itt_bios6/itt_app clean
make -fMAKEFILE.MK -C$(MCFW_ROOT_PATH)/itt/itt_linux clean
dcc:
$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/dcc $(TARGET) CORE=m3vpss
cp $(DEST_ROOT)/lib/$(ISA)/$(PROFILE_m3video)/dcc.aem3 $(iss_PATH)/packages/ti/psp/iss/alg/dcc/lib/release/iss_dcc.aem3
dcc_clean:
$(MAKE) -C $(MCFW_ROOT_PATH)/itt/itt_bios6/dcc clean
##### U-BOOT BUILD #####
ubootbuild:
$(MAKE) -C$(UBOOTDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) $(MAKE_TARGET)
uboot_ty_sd:
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORMCFG)$(SYSTEM_CFG)_min_sd
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
cp -f $(UBOOTDIR)/u-boot.min.sd $(IPNC_INSTALL_DIR)/tftp/$(IPNC_DEVICE)/sd/MLO
cp -f $(UBOOTDIR)/u-boot.min.sd $(UBOOTDIR)/MLO
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORMCFG)$(SYSTEM_CFG)_config_nand
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
cp -f $(UBOOTDIR)/u-boot.bin $(IPNC_INSTALL_DIR)/tftp/$(IPNC_DEVICE)/sd/
ubootmin:
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORMCFG)$(SYSTEM_CFG)min$(BINARY_MODE)
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
ifeq($(BINARY_MODE),sd)
cp $(UBOOTDIR)/u-boot.min.$(BINARY_MODE) $(TFTP_HOME)/MLO
cp $(UBOOTDIR)/u-boot.min.$(BINARY_MODE) $(UBOOTDIR)/MLO
else
cp -f $(UBOOTDIR)/u-boot.min.$(BINARY_MODE) $(TFTP_HOME)/u-boot.min.$(BINARY_MODE)
cp -f $(UBOOTDIR)/u-boot.min.$(BINARY_MODE) $(UBOOTDIR)/u-boot.min.$(BINARY_MODE).bk
cp -f $(UBOOTDIR)/u-boot.min.$(BINARY_MODE) /tftpboot/dm8127_min.bin
endif
ubootopti:
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORM_CFG)_ipnc_opti_nand
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
cp $(UBOOTDIR)/u-boot.opti.nand $(TFTP_HOME)/u-boot.opti.nand
ubootbin:
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORMCFG)$(SYSTEM_CFG)config$(BINARY_MODE)
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
cp -f $(UBOOTDIR)/u-boot.bin $(TFTP_HOME)/u-boot.bin
cp -f $(UBOOTDIR)/u-boot.bin $(UBOOTDIR)/dm8127_uboot.bin.bk
cp -f $(UBOOTDIR)/u-boot.bin /tftpboot/dm8127_uboot.bin
uboot_ty:
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORMCFG)$(SYSTEM_CFG)config$(BINARY_MODE)
$(MAKE) ubootbuild MAKE_TARGET=u-boot.ti
cp -f $(UBOOTDIR)/u-boot.bin $(TFTP_HOME)/u-boot.bin
cp -f $(UBOOTDIR)/u-boot.bin $(UBOOTDIR)/dm8127_uboot.bin.bk
cp -f $(UBOOTDIR)/u-boot.bin /tftpboot/dm8127_uboot.bin
ubootimg:
$(MAKE) ubootclean
$(MAKE) ubootbuild MAKE_TARGET=$(PLATFORM_CFG)_$(SYSTEM_CFG)_$(BINARY_MODE)_defconfig
$(MAKE) ubootbuild MAKE_TARGET=all
cp $(UBOOTDIR)/MLO $(TFTP_HOME)/
cp $(UBOOTDIR)/u-boot-dtb.img $(TFTP_HOME)/u-boot.img #### TODO: Verify if it is the right u-boot image
ubootclean:
$(MAKE) ubootbuild MAKE_TARGET=distclean
uboot:
$(MAKE) ubootimg
ubootall:
$(MAKE) ubootclean
$(MAKE) uboot
##### LSP BUILD #####
lspbuild:
make -C$(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) $(MAKE_TARGET)
lspmenu:
make lspbuild MAKE_TARGET=menuconfig
cp -f $(KERNELDIR)/.config $(KERNELDIR)/dm8127_2017xxxxaaa.config
cp -f $(KERNELDIR)/dm8127_2017xxxx.config $(KERNELDIR)/arch/arm/configs/ti8148_ipnc_ubifs_defconfig
lspcfg:
make lspbuild MAKE_TARGET=$(PLATFORM_CFG)$(SYSTEM_CFG)_defconfig
lsp:
cp $(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.o $(KERNELDIR)/drivers/char/
make lspcfg
make lspbuild MAKE_TARGET=uImage
make lspbuild MAKE_TARGET=modules
cp $(KERNELDIR)/arch/arm/boot/uImage $(TFTP_HOME)/uImage
cp $(KERNELDIR)/arch/arm/boot/uImage/$(KERNELDIR)/dm8127_kernel.bin.bk
cp -f $(KERNELDIR)/arch/arm/boot/uImage /tftpboot/dm8127_kernel.bin
-mkdir -p $(TARGET_MCFW_DIR)/kermod
cp $(KERNELDIR)/drivers/video/ti81xx/vpss/vpss.ko $(TARGET_MCFW_DIR)/kermod/.
cp $(KERNELDIR)/drivers/video/ti81xx/ti81xxfb/ti81xxfb.ko $(TARGET_MCFW_DIR)/kermod/.
cp $(KERNELDIR)/drivers/video/ti81xx/ti81xxhdmi/ti81xxhdmi.ko $(TARGET_MCFW_DIR)/kermod/.
# cp $(KERNELDIR)/fs/configfs/configfs.ko $(EXEC_DIR)
# cp $(KERNELDIR)/drivers/usb/gadget/libcomposite.ko $(EXEC_DIR)
# cp $(KERNELDIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko $(EXEC_DIR)
cp $(KERNELDIR)/drivers/usb/gadget/g_file_storage.ko $(EXEC_DIR)
cp $(KERNELDIR)/block/sbull/sbull.ko $(EXEC_DIR)
-mkdir -p $(TARGET_MCFW_DIR)/kermod/wlan
cp $(KERNELDIR)/net/wireless/cfg80211.ko $(TARGET_MCFW_DIR)/kermod/wlan/
cp $(KERNELDIR)/net/mac80211/mac80211.ko $(TARGET_MCFW_DIR)/kermod/wlan/
cp $(KERNELDIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko $(TARGET_MCFW_DIR)/kermod/wlan/
cp $(KERNELDIR)/drivers/net/wireless/ti/wlcore/wlcore.ko $(TARGET_MCFW_DIR)/kermod/wlan/
cp $(KERNELDIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko $(TARGET_MCFW_DIR)/kermod/wlan/
lspall:
make lspclean
make lsp
lspclean:
make lspbuild MAKE_TARGET=distclean
lsp_ty:
#make binariesclean
make cmemclean
make lspclean
make lspcfg
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) prepare
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) modules_prepare
make cmem
make lsp
lspcfgopti:
make lspbuild MAKE_TARGET=$(PLATFORM_CFG)_ipnc_$(FS_CFG)_opt_defconfig
lspopti:
cp $(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.o $(KERNELDIR)/drivers/char/
make lspcfgopti
make lspbuild MAKE_TARGET=uImage
make lspbuild MAKE_TARGET=modules
cp $(KERNELDIR)/arch/arm/boot/uImage $(TFTP_HOME)/uImage
##### SYSLINK BUILD #####
syslinkbuild:
cp $(MCFW_ROOT_PATH)/makerules/syslink_products.mak $(syslink_PATH)/products.mak
make -C$(syslink_PATH) $(TARGET)
syslink:
make syslinkbuild DEVICE=$(syslink_DEVICE) TARGET=syslink
-mkdir -p $(TARGET_MCFW_DIR)/kermod
cp $(syslink_OUT_DIR)/syslink.ko $(TARGET_MCFW_DIR)/kermod/.
syslinkclean:
make syslinkbuild DEVICE=$(syslink_DEVICE) TARGET=clean
syslinkall:
syslinkclean syslink
##### CMEM MAKE #####
cmem:
make -C$(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/interface \
LINUXKERNEL_INSTALL_DIR=$(KERNELDIR) MVTOOL_PREFIX=$(BUILD_TOOL_PREFIX)
make -C$(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/module \
LINUXKERNEL_INSTALL_DIR=$(KERNELDIR) MVTOOL_PREFIX=$(BUILD_TOOL_PREFIX)
cmemclean:
make -C$(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/module clean
make -C$(linuxutils_PATH)/packages/ti/sdo/linuxutils/cmem/src/interface clean
cmemall:
cmemclean cmem
##### FILESYS MAKE #####
ty_app_clean:
$(MAKE) -C $(IPNC_DIR)/ty_app/ ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) clean
ty_app_build:
$(MAKE) -C $(IPNC_DIR)/ty_app/ ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX)
ty_app_install:
$(MAKE) -C $(IPNC_DIR)/ty_app/ ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) install
ty_app_all:
ty_app_clean ty_app_build ty_app_install
ubifs:
mkdir -p $(IPNC_INSTALL_DIR)/tmp
$(MTD_UTILS)/mkfs.ubifs -r $(TARGET_FS) -F -o ./tmp/ubifs.img -m 2048 -e 126976 -c 1570
$(MTD_UTILS)/ubinize -o $(TFTP_HOME)/ubifs_$(SYSTEM_CFG).bin -m 2048 -p 128KiB -O 2048 $(IPNC_INSTALL_DIR)/ubinize.cfg
rm -rf $(IPNC_INSTALL_DIR)/tmp
ubifs_ty:
rm -f $(TFTP_HOME)/dm8127_ubifs.bin
mkdir -p $(IPNC_INSTALL_DIR)/tmp
$(MTD_UTILS)/mkfs.ubifs -r $(FILESYS_INSTALL_DIR)/ filesys -F -o ./tmp/ubifs.img -m 2048 -e 126976 -c 2047
$(MTD_UTILS)/ubinize -o $(TFTP_HOME)/dm8127_ubifs.bin -m 2048 -p 128KiB -s 2048 -O 2048 $(IPNC_INSTALL_DIR)/ubinize.cfg
rm -rf $(IPNC_INSTALL_DIR)/tmp
cp -f $(TFTP_HOME)/dm8127_ubifs.bin /tftpboot/dm8127_ubifs.bin
fsupdate:
cp -R $(TARGET_MCFW_DIR)/ $(EXEC_DIR)/.
cp -v $(IPNC_DIR)/utils/wlan/wl18xx-conf.bin $(TARGET_FS)/lib/firmware/ti-connectivity/
cp -v $(IPNC_DIR)/utils/wlan/ap_start.sh $(TARGET_FS)/usr/share/wl18xx/ap_start.sh
cp -v $(IPNC_DIR)/utils/scripts/autorun_csk.sh $(TARGET_FS)/opt/ipnc/autorun-usecase.sh
ifeq ($(SYSTEM_CFG), csk)
cp $(IPNC_DIR)/utils/UPnP_config/tvdevicedesc.xml.$(IPNC_DEVICE)_CSK $(TARGET_FS)/var/www/tvdevicedesc.xml.file
endif
chmod 755 $(EXEC_DIR)/.sh
ifeq ($(IMGS_ID), IMGS_MICRON_AR0331)
@echo "dcc_default_ar0331.bin selected"
cp $(EXEC_DIR)/dcc/dcc_default_ar0331.bin $(EXEC_DIR)/dcc/dcc_default.bin
endif
ifeq ($(APP_BUILD_CFG),release)
$(STRIP470) $(TARGET_FS)/opt/ipnc/firmware/ipnc_rdk_fw_m3video.xem3
$(STRIP470) $(TARGET_FS)/opt/ipnc/firmware/ipnc_rdk_fw_m3vpss.xem3
ifeq ($(PLATFORM),ti814x-evm)
ifeq ($(IPNC_CONFIG),FULL_FEATURE)
$(STRIP6x) $(TARGET_FS)/opt/ipnc/firmware/ipnc_rdk_fw_c6xdsp.xe674
endif
endif
chmod 755 $(TARGET_FS)/opt/ipnc/firmware/.
endif
@echo
@echo "--------------------------------------------------------------"
@echo "******** Build completed for following configuration *********"
@echo "--------------------------------------------------------------"
@echo "Hardware Platform : $(IPNC_DEVICE) $(SYSTEM_PLATFORM)"
@echo "Build Mode : $(APP_BUILD_CFG)"
@echo "Sensor Used : $(IMGS_ID)"
@echo "Sensor Vendor : $(SENSOR_BOARD_VENDOR)"
@echo "Configuration : $(IPNC_CONFIG)"
@echo "Filesystem Mode : $(FS_CFG)"
@echo "Memory Config : $(MEMORY_CONFIG)"
@echo "Build Date : $(shell date)"
@echo "--------------------------------------------------------------"
@echo
@echo "------------------------------------------------------------------------------------------------------------"
@echo "Please run < make lsp > if you have changed anything in kernel modules and use the new built image"
@echo "------------------------------------------------------------------------------------------------------------"
nfsreset:
/usr/sbin/exportfs -av
/etc/init.d/nfs-kernel-server restart
##### SYSTEM BUILD #####
sysclean:
binariesclean syslinkclean lspclean ubootclean cmemclean clean
sys:
make uboot
make lspcfg
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) prepare
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) modules_prepare
make cmem
make lsp
make syslink
make ipncapp
sysopti:
make ubootopti
make lspcfgopti
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) prepare
make -C $(KERNELDIR) ARCH=arm CROSS_COMPILE=$(BUILD_TOOL_PREFIX) modules_prepare
make cmem
make lspopti
make syslink
make ipncapp
sysall:
sysclean sys
sysoptiall:
sysclean sysopti
##### Release Binaries #####
binaries:
make sysall
make
make $(FS_CFG)
binariesopti:
make sysoptiall
make
make $(FS_CFG)
binariesclean:
rm -rf $(TARGET_MCFW_DIR)/bin
rm -rf $(TARGET_MCFW_DIR)/firmware
rm -rf $(TARGET_MCFW_DIR)/kermod
rm -rf $(MCFW_ROOT_PATH)/build
Hi Dan,
Difficult to say what's changed, could you please point to exact change that you did in this file?
Also Is the default make file work fine for you?
Regards,
Brijesh
Hi,
1.The changes are highlight by red color line and some puzzles are written by green font,please check on rules.make.docx i uploaded.
2.The default makefile may has some wrong, or somewhere exist error,so i want to check this makefile‘s correctness.
thanks.
regards,
dan