Part Number: 66AK2H12

Hi,

Please provide the "Master List of all the FAQs of Keystone-I and II devices such as C6657, C6678, K2E and K2H."

Part Number: AM62A7

Hi,

While trying to import SDK example into CCS 12.1.0, some might encounter the problem stating "AM62Ax device not recognized".

A more detailed overview of the issue can be seen in the screenshot below.

Lets look at a quick fix for the same which will hardly take less than five minutes of your time.

Regards,

Vaibhav

Part Number: AM6442

R5F, PRU_ICSSG/PRU-ICSS/PRU-SS, and M4F remote cores all have region-based address translation (RAT) modules. RAT modules allow a core to translate system addresses (e.g., DDR at 0x8000_0000) to a different local address (e.g., the remote core could write to a local address of 0x90000000, and the RAT could be configured to translate that write to the system address of DDR at 0x8000_0000). M4 cores are most likely cores to need to configure the RAT. However, be aware that the R5F and PRU cores also have RAT functionality.

When would the RAT settings need to be changed? When should the RAT settings NOT be changed? How do I change the RAT settings?

.

For information on other multicore subjects, reference the FAQ Sitara multicore development and documentation.

UPDATE January 2024: The information in this FAQ is being added to the processor academy modules. This FAQ will not be maintained going forward.
Please find the latest information in the processor's academy > MCU module > Region-based Address Translation (RAT):
AM62Ax

Part Number: 66AK2E05

Hi

How to run OOB Demo on K2E / K2H Keystone-II Devices ?

In response to the recent e2e posts, the FAQ lists redundant/recovery boot support in ROM loading R5-BL (BootLoader) in K3 SoCs, i.e. AM64x, AM62x, AM62A...

The FAQ also discusses the related topic on R5-BL integrity check by ROM on GP/HS. These SoC-level built-in features are useful for user on implementing a range of user cases  - normal boot, flashing, OTP key programming, SW update on the field etc... based on system design and requirements.

Part Number: TMS320C6678

Hi,

How to rebuild the IBL of Processor SDK 6.3 in Windows Environment?

Part Number: TMS320C6657

Hi,

How to calculate the "DDR3 Interface – Registers" for Keystone I devices and Test/Debug on Keystone I EVM ?

Hi TI Experts,

Can you provide a List of collaterals that can be referred when starting a custom board hardware design?

Part Number: 66AK2H12

Hi,

Would you please provide a "Quick start Guide for K2H - EVM " to enable a quick product development ?

Part Number: AM6412

Hi,

My customer has questions for MAC address in AM64x.
The customer understood MAC address is stored in CTRLMMR_MAC_ID0/1 registers.

Questions:
Q1) The vender code in the MAC address in SoC is TI, correct?
Q2) Is it ok to use these MAC addresses in customers' end equipment or each customer needs to use their own MAC addresses?

Thanks and regards,
Koichiro Tashiro