AFE7920EVM: f I may use TSW14J58 for AFE7989 EVM evaluation?

Andrew Su

Part Number: AFE7920EVM
Other Parts Discussed in Thread: AFE7920, AFE7989, AFE7769D

dears,

as I am also evaluating AFE7769D, so I applied TSW14J58, so I am wondering if I may use TSW14J58 for AFE7989 EVM test? The AFE7920 EVM user guide refers that TSW14J56/7 is used to co-work with AFE7920 EVM.

9 months ago

0 Kang Hsia 9 months ago

TI__Guru 68544 points

Hi Andrew,

Yes, we have a way to allow the AFE7989 to work with the TSW14J58 EVM.

Please advise the customer and also the use case for this request.

-Kang

0 Andrew Su 9 months ago in reply to Kang Hsia

TI__Intellectual 970 points

dear Kang,

do we need any SW or HW modification?

thanks a lot!

0 Kang Hsia 9 months ago in reply to Andrew Su

TI__Guru 68544 points

Hi Andrew,

No, this is not expected. For the same Latte GUI, you can set setupParams.skipFpga = false. You may then use the TSW14J58 EVM with the AFE7989 EVM directly.

For further setup related inquiries, I will ask Simran to help on this. Ali had walk through the setup with Simran to better support you.

-Kang

0 Andrew Su 9 months ago in reply to Kang Hsia

TI__Intellectual 970 points

dear Kang,

thanks a lot!

0 Kang Hsia 8 months ago in reply to Andrew Su

TI__Guru 68544 points

customer support for Kingsignal have been re-directed to the following post:

https://e2e.ti.com/support/rf-microwave-group/rf-microwave---internal/f/rf-microwave---internal-forum/1275092/afe7989-kingsignal-afe7989-evm-spec/4909766?tisearch=e2e-sitesearch&keymatch=kingsignal#4909766

closing this thread.

RF & microwave

RF & microwave forum

AFE7920EVM: f I may use TSW14J58 for AFE7989 EVM evaluation?