Texas Instruments (TI) Sensors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search sensors IC content or ask technical support questions on everything from temperature and humidity sensors to magnetic sensors and mmWave sensors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] PGA900: How do I communicate with PGA900/PGA970 when the compensation algorithm is running using the COMBUF?

    Part Number: PGA900 I want to read data from the ADCs or the compensation algorithm, or any other register while the PGA900/970 is running. Most registers can only be read/written while the device is in reset, and they are inaccessible while the device…

  • [FAQ] Running I2C in Standard Mode (100kHz)

    Part Number: TMP103 Hello Team, Regarding the TMP sensor family, are they able to run at 100kHz as named ‘Standard Mode’ in the I2C standard? If so, are all the sensor specifications compatible with the I2C standard?

  • [FAQ] AWR2E44PEVM: AWR2E44PEVM OOB Demo : Antenna Calibrations

    Part Number: AWR2E44PEVM The following are the steps to calibrate the LOP antenna for the AWR2E44PEVM. Flash the board with the mmw app image present in the latest SDK. Example Path: C:\ti\mmwave_mcuplus_sdk_04_07_01_04\mmwave_mcuplus_sdk_04_07_01_04…

  • [FAQ] TMAG5230: What is TI’s smallest Hall-Effect switch?

    Part Number: TMAG5230 TI’s smallest Hall-Effect switch is TMAG5230 which comes in a WCSP (wafer chip scale package) at a size of 0.74mm x 0.74mm x 0.35mm. This device is designed specifically to be able to be used in space constrained applications in…

  • [FAQ] AWR2944P: condition breakpoint usage on CCS, test with awr2944p

    Part Number: AWR2944P modify based on high end corner radar radar_toolbox_3_30_00_06/source/ti/examples/Automotive_ADAS_and_Parking/high_end_corner_radar/src/demo/awr2x44p/mss/mss_main.c Add a variable conditional_break, the if and debug log is…

  • [FAQ] AWR2944P: CCS hardware breakpoint on awr2944p

    Part Number: AWR2944P 1.flash in ccs debug image 2. ccs start and launch a configuration using awr2x44p 3.build a debug version and find a variable you may want to monitor like this: here the forth (index 3) in gMmw_MCB.cqSigImgMonCfg with…

  • [FAQ] PGA970: Can I use an external microcontroller with PGA970?

    Part Number: PGA970 Tool/software: I would like to use an external microcontroller with PGA970. Is this possible? What are the limitations of this approach?

  • [FAQ] PGA900: How do I launch a debug session in CCS?

    Part Number: PGA900 Other Parts Discussed in Thread: PGA970 Tool/software: I am writing firmware for PGA900/970. I am trying to launch a debug session so I can debug my firmware. How do I launch the session properly?

  • [FAQ] PGA970: Is there general information and guidance regarding the PGA970?

    Part Number: PGA970 Other Parts Discussed in Thread: PGA900 Tool/software: I'm having some issues and need some guidance regarding the PGA970. What information is available?

  • [FAQ] PGA900: How do I setup my debug configuration in CCS?

    Part Number: PGA900 Other Parts Discussed in Thread: PGA970 , Tool/software: I have firmware I want to debug for PGA900 or PGA970? How do I setup my debug configuration in CCS?

View FAQ threads