Hello,
When the MMwaveICBoost was powered on,only one LED (D8) is on and we do not know the cause of this behaviour.
Please suggest on how to proceed.
Thanks,
Sowmya N
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
When the MMwaveICBoost was powered on,only one LED (D8) is on and we do not know the cause of this behaviour.
Please suggest on how to proceed.
Thanks,
Sowmya N
Hi, you can check the below link to proceed.
Hi Zhang,
Thank you for the response.
Upon following the thread mentioned in the reply, we found that voltage on SOP jumper is not 3.3v
Please find the images of the board below.
Please let us know if there is any way to get the board back to working.