DRV5021: omnipolar part having same detection threshold and sampling rate as DRV5021

Hung Ching Hsu

Part Number: DRV5021
Other Parts Discussed in Thread: DRV5033, TMAG5231, DRV5032, TMAG5328

Hi Team,

My customer is now considering DRV5021A1 now and he wants to know if TI have omnipolar part having same detection threshold and sampling rate as DRV5021A1.

I found DRV5033FA should be the closest one, is it correct?

Thanks.

Regards,

over 1 year ago

+1 Scott Bryson over 1 year ago

TI__Genius 15270 points

Jo,

Thank you for your question here. Most of our switches operate with a maximum sample rate of 20 kHz. DRV5033 is our only omnipolar option which samples at 30 kHz. Of the sensitivity options available, you are correct that DRV5033FA has the closest thresholds to DRV5021A1.

Scott

0 Hung Ching Hsu over 1 year ago in reply to Scott Bryson

TI__Expert 3086 points

Hi Scott,

Thank you for the reply. As you said most of switch have max. sample rate of 20kHz.

Customer wants to know is there other omni-polar, 20kHz device have similar threshold as DRV5021A1 and less variation than DRV5033FA?

Thanks.

Regards,

0 Isaac Lara over 1 year ago in reply to Hung Ching Hsu

TI__Mastermind 19630 points

Hey Jo,

There are other switches that have similar threshold and less variation than the DRV5033FA, but they unfortunately do not meet the 20kHz spec the customer is looking for. The other devices tend to be low power devices which in turn limits the frequency bandwidth of the devices.

In case if you are interested in looking at those, you can check DRV5032, TMAG5231, and TMAG5328 which has adjustable threshold via a resistor.

Best,

Isaac

Sensors

Sensors forum

DRV5021: omnipolar part having same detection threshold and sampling rate as DRV5021