TMP126EVM: Data logging for TMP126 EVM application

Mark Betts

Part Number: TMP126EVM
Other Parts Discussed in Thread: TMP126

Hello,

I have used previous versions of the EVM data logging for the web interface for the TMP126 and that worked OK.

When I use https://dev.ti.com/gallery/view/THSApps/tmp126gui/ver/1.0.3/ and use the "Save Start", then there does not appear to be any start of data logging, or any record in the application log of data recording starting.

I cannot find any .csv file started after searching the whole hard drive. The data is shown in the plot window and all appears OK reading around 25DegC , but no recording log file ?

Is this a known bug or is there something stopping the logging ?

I think the last time Firefox did not log data, but Chrome did, but now nether work. I have also tried two PC's.

Regards,

MB.

over 1 year ago

0 Jalen Tate89 over 1 year ago

TI__Genius 9675 points

Hi Mark,

I'll need to get my hands on an EVM and check this on my system. Will get back to you today to see if I get the same issue.

Jalen

0 Jalen Tate89 over 1 year ago in reply to Jalen Tate89

TI__Genius 9675 points

Mark,

I'm seeing the same issue on my end. Thanks for bringing this to my attention. Let me talk with a team member and see what the potential issue could be.

Jalen

0 Ren Schackmann over 1 year ago

TI__Mastermind 39155 points

Hi Mark,

I've published version 1.0.4 which addresses your issue. Please let us know if it is resolved for you.

dev.ti.com/.../tmp126

thanks,

ren

0 Mark Betts over 1 year ago

Prodigy 70 points

Hi Ren,

I have installed 1.0.4, but I cannot see it start a .csv log file when I start the data recording, which folder is the data saved into ?

+1 Ren Schackmann over 1 year ago in reply to Mark Betts

TI__Mastermind 39155 points

Mark,

If you are using the online version, you should see the results streaming to a download file. Behavior may vary from browser to browser or based on browser configuration:

If you are using the offline version, I've confirmed there is still an issue. Please use the online version if you are able to. I apologize for the inconvenience. A fix for the offline version should only take a day or two.

thanks,

ren

0 Mark Betts over 1 year ago in reply to Ren Schackmann

Prodigy 70 points

Hi Ren,

OK - I was using the offline version - The V1.0.5 has been released and all working OK thankyou,

Regards,

Mark.

0 Ren Schackmann over 1 year ago in reply to Mark Betts

TI__Mastermind 39155 points

Hi Mark,

I've also confirmed v1.0.5 offline working this morning. Thanks for confirming the same, and thanks for your patience.

ren

Sensors

Sensors forum

TMP126EVM: Data logging for TMP126 EVM application