BOOSTXL-BASSENSORS SENS026A Interface with LP-MSPM0G3507

Andrew Jeon

Other Parts Discussed in Thread: HDC2010, TMP116, OPT3001, LP-MSPM0G3507

Is there any code examples on how to take readings from each of the four sensors on the SENS026A Booster Pack (OPT3001, HDC2010, DRV5055A, TMP116) through I2C using the LP-MSPM0G3507 Launchpad?

over 1 year ago

+1 Brandon Fisher94 over 1 year ago

TI__Mastermind 28070 points

Hi Andrew,

No, there is not currently any code for pairing the M0 launchpads with this booster pack.

The I2C examples in the SDK could be used as a starting point, as these three have an I2C interface, but there's nothing currently planned to be written for these in the short term.

Best Regards,
Brandon Fisher

Sensors

Sensors forum

BOOSTXL-BASSENSORS SENS026A Interface with LP-MSPM0G3507