• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 78 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV5032: Bent legs package

Ambroise Suter
Expert 3860 points
Part Number: DRV5032

Hello,

We would like to use the DRV5032 in the TO-92 package (LPG). Would it be possible to get this device in pre-bent legs similar to the LP package: LP0003A LP (O-PBCY-W3) 4040001-2 and 4215214 (Rev. D) (ti.com)?

Thank you and best regards,

Ambroise

  • +1
    TI__Genius 16320 points

    Ambroise,

    Thanks for reaching out.  For the LPG package, we do not provide any options to pre-form the legs.  Bending leads is not typically recommended.  If not done correctly, this can damage the packaging and possibly lead to device failures over time.  Any effort to do this must be owned by the customer, and should be done with extreme caution as we can no longer guarantee quality over time once the packaging is damaged.

    Thanks,

    Scott