• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 32 subscribers
  • Views 156 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1843BOOST: config file for MRR demo

Ben Babu
Prodigy 90 points
Part Number: IWR1843BOOST

Is There any config file present for MRR demo?
if it is, how we can trace it, modify it ?

  • 0
    TI__Guru*** 138439 points

    Hi,

    The configuration is hard coded in the demo header files.

    Please read the user guide for more information

    thank you

    Cesar

  • 0 in reply to Cesar
    Prodigy 90 points

    Hi cesar I didnt find any particular. could you please mention where I can find it.

  • 0 in reply to Ben Babu
    TI__Guru*** 138439 points

    Sure

    Please see "Demo Configuration" and "RF Configuration"

    radar_toolbox\source\ti\examples\ADAS\medium_range_radar\docs\Medium_Range_Radar_users_guide.html

    Thank you

    Cesar

  • 0 in reply to Cesar
    Prodigy 90 points

    Hi Cesar,
    I'm confused with this statement "The MRR demo also supports a CLI, however the main difference with the other demos is that the RF configuration is not sent through the UART but hard coded in the application that runs on the target."

    Could you please tell me where the parameter were hardcoded.   I couldn't find any particular parameters which can modify. Please help me with this

  • 0 in reply to Ben Babu
    TI__Guru*** 138439 points

    Hi,

    Please see

    lab0007_medium_range_radar\src\common\mrr_config_chirp_design_MRR120.h

    lab0007_medium_range_radar\src\common\mrr_config_chirp_design_USRR30.h

    I will close this thread now

    For new questions please start a new thread

    Thank you

    Cesar