Other Parts Discussed in Thread: OPT4001-Q1
Hi Team,
I would like to check if our OPT3001-Q1 and OPT4001-Q1 can meet the spec or not. smoke print spec 14%+-4% in 550nm
Regards,
Roy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I would like to check if our OPT3001-Q1 and OPT4001-Q1 can meet the spec or not. smoke print spec 14%+-4% in 550nm
Regards,
Roy
Hi Roy,
Is 14% the transmission of the dark glass that is placed in front of the sensor? If so, this will work, the customer will just need to calibrate the device behind the dark glass.
Light Sensor Calibration in the Lab
https://www.ti.com/video/series/precision-labs/ti-precision-labs-ambient-light-sensors.html
Thank you,
Brent Elliott