Other Parts Discussed in Thread: PGA900
Hi TI,
I want to express my gratitude for all the assistance provided in previous posts. We have successfully tackled the most crucial aspects of our project.
We have developed a script that systematically goes through all the configuration and calibration steps, resulting in a fully functional and calibrated 4-20mA sensor.
This accomplishment signifies that we are now prepared to transition from research and development to the production phase.
In this regard, we typically need to store a few unique identifiers on the EEPROM, such as a:
- unique serial number
- batch number
- membrane number
- and so on.
However, we've noticed that EEPROM has allocated one 4-byte number for the serial number in register 0x64 to 0x67. Are there any other available registers that we can utilize for storage, which are not internally in use? We suspect there might be, especially since this is the PGA305, not the PGA900, which utilizes all registers.
We would greatly appreciate a list of all the available registers that we can use for this purpose.
Thank you for your assistance.
Best Regards
Mohammad Waqas Imtiaz
