TMP6-THERMISTOR-DESIGN: unprotect

Avinoam Danieli1

Part Number: TMP6-THERMISTOR-DESIGN
Other Parts Discussed in Thread: TMP64, TMP63

Hello

I need TMP64 device resistance table with 100000 ohm Rbias. But there is 47000 Rbias. The sheet is protected and I can not change it. Is there a way to get device resistance table with 100000 ohm Rbias.

Thank you.

4 months ago

0 Simon Rojas Avila 4 months ago

TI__Expert 4835 points

Hi,

You are correct, the bias resistor within the thermistor design tool cannot be changed from its set value. This is because the thermistor has been characterized at the set R bias values in the design tool. If using a 100k ohm bias, I recommend using TMP63 instead.

Best regards,

Simon Rojas

0 Avinoam Danieli1 4 months ago in reply to Simon Rojas Avila

Prodigy 130 points

thank you

Sensors

Sensors forum

TMP6-THERMISTOR-DESIGN: unprotect