Tool/software:
Hi Team,
Could you help me find the GUI with the corresponding radar configuration to get it running as described in the Users Guide? For Application Obstacle Detection AOP:
Thanks,
Daria
Tool/software:
Hi Team,
Could you help me find the GUI with the corresponding radar configuration to get it running as described in the Users Guide? For Application Obstacle Detection AOP:
Thanks,
Daria
Hi Daria,
You should be able to find it in the following location.
radar_toolbox_<ver>\tools\visualizers\Automotive_Obstacle_Detection_GUI
Can you please give it a try and let me know if its ok?
Regards,
Kaushik
Hi Kaushik,
no need to consider my question above. The GUI is running and I can see the detections and clusters.
However, I have another question regarding the cluster color. The Obstacle Detection User's Guide mentions that a cluster is red if its center is within 1 meter of the antenna, and green if it is outside 1 meter. Could you please tell me where I can change this value to 3 meters?
Thank you,
Amar
Hi Amar,
Please go through the following link which might help you with this change.
3-D scatter plot - MATLAB scatter3 (mathworks.com)
Regards,
Kaushik