AWR2243: TIDA-020047 test application

Part Number: AWR2243
Other Parts Discussed in Thread: MMWAVE-MCUPLUS-SDK, TIDA-020047, ,

Tool/software:

Does MMWAVE-MCUPLUS-SDK support TIDA-020047?

www.ti.com/.../TIDA-020047
www.ti.com/.../MMWAVE-MCUPLUS-SDK

MMWAVE-MCUPLUS-SDK v04.06.00.01 seems to provide a test application for TIDA-020047.

In the post below Jitendra-san said:

e2e.ti.com/.../5173483
MCU Plus SDK provides test application for 2xAWR2243+AM273x (TIDA-020047), that would be good reference for you. This example is

mmwave_mcuplus_sdk_04_06_00_01/mmwave_mcuplus_sdk_04_06_00_01/ti/utils/test/cascade/am273x

But the MMWAVE-MCUPLUS-SDK v04.06.00.01 user guide describes that 2 x AWR2243 EVMs (i.e. 2 x AWR2243BOOST) are used, not TIDA-020047.

dr-download.ti.com/.../mmwave_mcuplus_sdk_user_guide.pdf
4.6. How to run 2-Chip cascade application (Applicable for only AM273X + 2xAWR2243 EVM)

Is the test application in MMWAVE-MCUPLUS-SDK v04.06.00.01 work without modifications on TIDA-020047?

Best regards,

Daisuke

  • HI,

    The 2xAWR2243 EVM is the TIDA-020047 EVM.

    Sorry for the confusion

    If you have the TIDA-020047 EVM, the following example should run on the board

    mmwave_mcuplus_sdk_04_06_00_01/mmwave_mcuplus_sdk_04_06_00_01/ti/utils/test/cascade/am273x

    Thank you

    Cesar

  • Hi Cesar-san,

    Thank you for your reply.

    Our customer wants to copy the TIDA-020047 reference design to create their test board, but needs a quick demo environment.

    Can the steps in the user guide be directly applied to TIDA-020047?

    Can the executable file for the R5 core, "am273x_cascade_mss.xer5f," and the JSON file for configuring the test environment, "AM273X_Capture.json," be used for TIDA-020047 without modification?

    Is there plan to release TIDA-020047 as an EVM?

    If so, when is the release?

    Best regards,

    Daisuke

  • Hello, 

    Cesar is out of office, please expect a delay in response