BOOSTXL-PGA460: MSP-EXP430F55LP

Olivia Ehrman

Part Number: BOOSTXL-PGA460

Tool/software:

Hello,

I asked a question recently about getting the raw ADC data and since receiving the BOOSTXL-PGA460 and the MSP-EXP430, I have some follow-up questions about that. There was a previous reply that said it was possible to get the raw ADC data from the GUI, but I have no idea where to find information on how to go about doing that and was wondering if someone could please point me in the right direction.

Best,

Olivia

2 days ago

+1 Isaac Lara 2 days ago

TI__Mastermind 20830 points

Hello Olivia,

Thanks for posting to the sensors forum. To collect the ADC raw data is configured via the graph tab in the data monitor page of the GUI. You can use the graph mode to change the type of data that is being collected on the device. Just note that if you are trying to export the raw ADC data it does not work great if you are trying to measure multiple loops and you can only export a single loop at a time.

To get more detailed information you can read the EVM user's guide found here: https://www.ti.com/lit/ug/slau659b/slau659b.pdf please check section 3.5.2.1 Data Monitor Tabs.

Best,

Isaac

0 Olivia Ehrman 3 hours ago in reply to Isaac Lara

Prodigy 30 points

Thank you Isaac!!

0 Isaac Lara 2 hours ago in reply to Olivia Ehrman

TI__Mastermind 20830 points

No worries glad to help out Olivia!

Best,

Isaac

Sensors

Sensors forum

BOOSTXL-PGA460: MSP-EXP430F55LP