• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 126 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] Getting Started on TI E2E™︎ design support forums

AWR1843AOPEVM: Compare a mmwave sensing estimator max range with a real test

Ali AAK
Prodigy 170 points
Other Parts Discussed in Thread: AWR1843AOPEVM, AWR1843BOOST

Tool/software:

Hi,

i want to know can i trust mmwave sensing estimator results?

i searched for a measurement test data from for example AWR1843AOPEVM with clear mentioned complete config parameters in order to compare it with results from mmwave sensing estimator, but i couldn't found.

i saw 150m maximum range in test of AWR1843BOOST EVM for a car. but i couldn't found it's clear config parameters for example Radar Cross section, measurement rate, snr , ... . can you help me and introduce a measurement test with clear config data that i can import it to mmwave sensing estimator?

thanks

  • 0
    TI__Mastermind 20605 points

    Hi Ali,

    Please find my responses below:

    1. Ali AAK said:
      i want to know can i trust mmwave sensing estimator results?
    Yes. You can trust them.
  • I am not sure if I can understand your question from here. Are you looking for some measurement data or some reference configuration to produce a certain kind of data?
  • You can refer this document to further interpret how to set up your configuration based on your detection use case.
    1. www.ti.com/.../swra553

    • Regards,

    Kaushik