LM96194 monitoring voltage tolerances

prachi panse1

Other Parts Discussed in Thread: LM96194

Hi,

On the page 12 of the LM96194 datasheet, the nominal voltage values for the voltage monitoring pins is mentioned.

Can you please let me know what is the tolerance for this voltage value? This will help me select the resistors of correct tolerance specifications.

Regards,

Prachi

over 10 years ago

0 prachi panse1 over 10 years ago

Intellectual 980 points

Hi,

Could you please let me know regarding my query about the nominal voltage values?

Regards,

Prachi

0 Aaron Heng over 10 years ago in reply to prachi panse1

TI__Mastermind 31650 points

Hi Prachi,

I’m sorry for the delay. We recommended 1% resistor for the voltage divider, but you are welcome to use 0.1%; the cost might be 5x more. The tolerance for the voltage input monitoring is about 2%; please refer to the LM96194 datasheet page 93 for more detail.

I hope this helps. Please let me know if you have further question.

Aaron

Sensors

Sensors forum

LM96194 monitoring voltage tolerances