• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 542 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC1000: ldc1000

NAGAJOTHI SUNDAR
Prodigy 10 points

Part Number: LDC1000

Can i use LDC1000 click board with external 8MHZ crystal board to communicate with arduino by using your code.

please reply

thanks

s.nagajothi

  • 0
    TI__Genius 13335 points
    Hello,
    I am not familiar with the LDC1000 click board, however I found the following document on the web: www.tme.eu/.../mikroe-1583.pdf
    If this is the board you are referring to, then as long as you have the pinout correct and the proper voltages supplied and I/O levels, it should work with your MCU.
    You may also refer to the LDC1000EVM as an example which uses an MSP430 or consider the LDC1101EVM which is the 2nd generation of the device family and features a number of improvements to the performance. Refer to the LDC device selection guide (www.ti.com/.../SNOA954) for more information.
    Regards,
    Luke