This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC1612-Q1: Regarding pin connection of LDC1612

Part Number: LDC1612-Q1
Other Parts Discussed in Thread: LDC1612

I am going to measure the inductance value of solenoid coil by using the LDC1612.  In default, solenoid one end is connected with Ground.  So I can connect the IN0B pin with ground. Whether it will work?

Kindly guide me.

  • Hello Vengatesh,

    This will not work. During the sensor excitation period, both INxA and INxB are actively driven. If either pin is shorted to GND the LDC1612 will likely not be able to drive the sensor nor make inductance measurements.

    Best Regards,